Completing The Installation With The Ascii Text Wizard - HP StoreAll Series Installation Manual

Completing the installation with the ASCII text wizard

If you selected Join this IBRIX server to an existing cluster on the X9000 Installation - Network
Setup Complete screen in
NOTE: At any time during this procedure, you may select Back (if available) to go to the previous
screen or Cancel to exit the installation procedure. If available, you may also press F1 to display
on-screen help information.
Use the Space bar and Tab key to move between screen options or move to available screen
buttons, such as Cancel, Ok, Back, and so forth.
1. On the Join Cluster screen, do one of the following:
Select the applicable management console, and then select Ok.
If the applicable management console is not listed on the Management Console IP screen,
select Cancel. Enter the IP address of the management console, and then select Ok.
The wizard registers and starts a passive management console on the blade. After the passive
management completes its process successfully, the Action Succeeded screen appears.
238 Expanding an existing HP StoreAll Storage system using the Setup Wizard
Step 16, complete the following steps: