HP StoreAll Series Installation Manual page 82

IMPORTANT:
installation. HP StoreAll 9730 Storage systems have been tested with specific node firmware
versions. Continuing the installation without upgrading to a supported firmware version can
result in a defective system.
2. Provide the host name (blade name) on the Individual Server Setup screen. The installation
detects the time settings.
NOTE:
characters and the hyphen (-) special character. It is a best practice to use only lowercase
characters in host names; uppercase characters can cause issues with HP StoreAll OS Software.
Do not use an underscore (_) in the host name.
3. If needed, update the time settings on the Individual Server Setup screen. While setting the
time zone, press Enter while the cursor is positioned in the Time Zone field to display the list
of time zones in a separate screen. Enter the first letter of your time zone, or use the UP and
DOWN arrow keys to find your time zone. Select Ok to accept screen selections.
On the Network Configuration screen, the system defines the server on Bond0.
4. Complete the Network Configuration screen(s):
Hostname: The host name (in the example, Bond0) can include alphanumeric characters
and the hyphen ( ) special character. It is a best practice to use a host name with only
82 Installing the HP StoreAll OS Software and configuring the HP StoreAll Storage system
HP recommends that you update node firmware before continuing with the
The host name, which is the name of the local server, can include alphanumeric