HP StoreAll Series Installation Manual page 14

Figure 7 HP StoreAll 8800 Storage system with 10 GbE network ports (rear)
1. Slot 1 — Controller 1 (port 1 on right, port 2 on left)
2. Slot 2 (blank)
3. Slot 3 (blank)
4. Slot 4 — Controller 2 (port 1 on right, port 2 on left)
5. Slot 5 — 10 GbE NICs (ports 1–4 from right to left)
Figure 8 ENT SAS capacity block (rear)
1. Port 1
2. Port 2
3. I/O module A
4. I/O module B
14 Setting up and installing HP StoreAll hardware
6. Slot 6 — 10 GbE NICs (ports 1–4 from right to left)
7. iLO port
8. eth0 (port 1) — for management network
9.eth1 (port 2) — for management network