Step 5 - Selecting File System Storage; Creating New Storage - HP StoreAll Series Installation Manual

The File System screen allows you to create a new file system or extend an existing file system on
newly discovered storage. On the File System screen, select one of the following options:
Create a new file system. This option allows you to create a new file system. Enter the new
file system name in the field specified, and click Next. The File System Storage screen appears.
Expand an existing file system. This option allows you to select an existing file system from a
populated list and add it to the existing file system. If you select this option, a list of available
storage is displayed. Select the storage that is to be included in the file system, and click Next.
The File System Storage screen appears.
Do nothing at this time, I will create my file system(s) later. This option allows you to skip the
file system setup process. If you select this option and click Next, the File System Storage
screen appears.

Step 5 - Selecting File System Storage

Selecting storage to be used
On the File System Storage screen, select the storage to be used (make multiple selections, if
necessary). If needed, change the default segment owner of each storage LUN to set the owner
explicitly. Use the filters to limit the storage that is displayed. Click Next after you are done. The
Configure Options screen appears.

Creating new storage

On the File System Storage screen, select the storage to be included in the file system. If necessary,
change the segment owner for each LUN if you want to explicitly set it. Use the filters to limit the
storage to be displayed.
Step 5 - Selecting File System Storage 135