Adding A Server - HP StoreAll Series Installation Manual

4. When finished, click OK to return to the Configure File Server screen, and then click OK again
to return to the File Servers screen.

Adding a server

If your cluster includes servers that are not listed on the File Servers screen, first, configure an IP
address manually on the servers using their local console Individual Server setup screens. See
"Installing the HP StoreAll OS Software and configuring the HP StoreAll Storage system" (page 50)
for additional information on adding and setting up bonds and configuring port modes and default
gateways for the missing server. Then, click Add on the File Servers screen to add the servers to
the cluster.
To add a server to a cluster:
1. On the File Servers screen, click Add. The Add Servers screen appears.
You can enter a single IP address on the Add Servers screen, or you can enter a range of
addresses, and then the wizard locates all servers with IP addresses in the range.
To add a single server, enter the IP address of that server.
To add multiple servers, enter a range of IP address (for example 192.168.0.50 to 100).
2. Click OK after you are done to return to the File Servers screen.
Step 3 - Reviewing servers listed on the File Servers screen and designating which servers to be included in the cluster 1 1 1