Step 4 - Creating A Default File System - HP StoreAll Series Installation Manual

3. If you are finished with setting up file servers and the firmware is up-to-date, click Next.
The system verifies entries. The Create a Default File System screen appears.

Step 4 - Creating a Default File System

Use the Create a Default File System screen to create this file system (enter a name for the file
system). You can choose to create the file system at a later time.
HP recommends that you create one file system using storage available in the cluster. You can
choose to create the file system at a later time. You can also create NFS and SMB shares on the
file system.
If you create an SMB share, you need to configure the nodes for SMB and configure authentication.
You might also want to set certain SMB parameters, such as user permissions. Other configuration
options are also available for NFS shares. See the HP StoreAll OS User Guide for more information.
When are finished, click Next to continue. After you click Next, the system completes background
processing tasks. This process consumes all storage in your system, and my take several hours.
After background processing is complete, the Summary screen appears.
The system changes the Fusion Manager GUI IP address to the one entered on the Cluster Settings
screen (see "Step 1 - Setting up Cluster Settings" (page
1 12 Configuring clusters remotely with the Getting Started Wizard
107)).