HP StoreAll Series Installation Manual page 13

Figure 5 HP StoreAll 8800 Storage system with HP ENT SAS and MDL SAS capacity blocks (front)
1. HP StoreAll node couplet (front)
2. ENT SAS capacity block
3. MDL SAS capacity block
Figure 6 HP StoreAll 8800 Storage system with 1 GbE network ports (rear)
1. Slot 1 — Controller 1 (port 1 on right, port 2 on left)
2. Slot 2 (blank)
3. Slot 3 (blank)
4. Slot 4 — Controller 2 (port 1 on right, port 2 on left)
5. Slot 5 — 1 GbE NICs (ports 1–4 from right to left)
6. Slot 6 — 1 GbE NICs (ports 1–4 from right to left)
7. iLO port
8. eth0 (port 1) — for management network
9. eth1 (port 2) — for management network
Understanding platform configurations 13