Discovering And Configuring Hp Storeall Servers And Their Storage; Server And Storage Expansion Wizard Prerequisites; Accessing And Using The Hp Storeall Server & Storage Expansion Wizard; Logging In To The Hp Management Console - HP StoreAll Series Installation Manual

5 Discovering and configuring HP StoreAll servers and their
storage
This chapter applies only to 8xxx, 93xx, and 9730 storage systems.
The Server and Storage Expansion Wizard allows you to add servers or storage to an existing
configuration.
NOTE: You do not need to use the Server and Storage Expansion Wizard if you have run the
Getting Started Wizard and followed the full installation process. You use the Server and Storage
Expansion Wizard to add servers or storage to your configuration after the initial installation has
been completed.

Server and Storage Expansion Wizard prerequisites

Before you begin the Server and Storage Expansion Wizard:
Perform a cabling verification (8800 and 9730 systems only). See
and 9730 only)" (page
Verify LUNs and component firmware. See
(page 57).
NOTE: Adding enclosures to an HP StoreAll 8800 Storage system must be done offline.
Accessing and using the HP StoreAll Server & Storage Expansion Wizard

Logging in to the HP Management Console

From the StoreAll Management console, open the Server & Storage Expansion Wizard screen to
display the Welcome screen.
48).
"Verifying LUNs and component firmware"
Server and Storage Expansion Wizard prerequisites 127
"Cabling verification (8800