Selecting Bonds From The Network Management Screen; Viewing And Updating Node Firmware From The Confirmation Screen - HP StoreAll Series Installation Manual

Selecting bonds from the Network Management screen

1. On the Network Management screen, select the bond name for each device on which the
bond needs to be configured.
2. After you are finished configuring file servers, click Next. The Confirmation screen appears.

Viewing and updating node firmware from the Confirmation screen

If one or more of the system components are not at the required firmware levels, the firmware tool
prompts you to upgrade your firmware. See the Administrator Guide for your HP StoreAll system
for information on how to upgrade the firmware.
HP recommends that you upgrade the firmware before you continue with wizard functions. After
the upgrade is complete, click Retry to continue. If necessary, complete the upgrade during a
scheduled maintenance window; click Skip Warnings & Proceed to do so.
132 Discovering and configuring HP StoreAll servers and their storage