Configuring File Servers - HP StoreAll Series Installation Manual

2. If a server is not defined, select the server, and click Configure.
3. Click Next after you are done.

Configuring File Servers

Unconfigured servers are displayed as Not Defined in the Hostname and IP Address columns.
To configure a server:
1. If required, select an unconfigured server, and click Configure. The Configure File Server screen
appears.
2. On the Configure File Server screen, click Configure in the Network Configuration box.
3. On the Configure File Server screen that opens, enter the host name and IP address. If the
wizard can locate the subnet masks and the iLO IP address, it automatically populates those
fields. If a value has been configured, details in that field are grayed-out.
1 10 Configuring clusters remotely with the Getting Started Wizard