About The Hp Storeall Storage System; Supported Platforms; Factory Default And Current Hp Storeall Os Software Version Information; Limitations And Restrictions - HP StoreAll Series Installation Manual

Table of Contents

Advertisement

1 About the HP StoreAll Storage System

The HP StoreAll Storage system is a complete software and hardware solution that enables users
to manage unstructured data storage requirements. The HP StoreAll Storage system uses compatible
nodes (servers) and storage devices, and data requirements are managed through a simple-to-use
graphical user interface application. With HP StoreAll Storage, users can scale data center
requirements to billions of files, 16 petabytes, and 1,024 nodes in a single namespace with
centralized management.

Supported platforms

Supported platforms discussed in this guide include:
HP StoreAll 8200 Gateway Storage system
HP StoreAll 8800 Storage system
HP StoreAll 9300 Gateway Storage system
HP StoreAll 9320 Storage system
HP StoreAll 9730 Storage system

Factory default and current HP StoreAll OS Software version information

The current HP StoreAll OS Software version is v6.5.
Pre-installed HP StoreAll OS Software versions for all HP-supported HP StoreAll Storage systems
are listed in
Table 1 (page
Table 1 Factory default versions for HP StoreAll storage systems
Model
HP StoreAll 8200 Gateway Storage system
HP StoreAll 8800 Storage system
HP StoreAll 9300 Gateway Storage system
HP StoreAll 9320 Storage system
HP StoreAll 9730 Storage system
IBRIX X9720 storage system

Limitations and restrictions

Observe the following limitations and restrictions associated with the installation and configuration
of HP StoreAll Storage systems:
HP StoreAll nodes (servers), based on the HP ProLiant DL380 Gen6 blade, are not compatible
with the current HP StoreAll OS Software version of HP StoreAll OS Software. HP Storage
systems using this specific type of node must be upgraded to an HP ProLiant DL380 Gen7 or
later device. See
(page 7)
Only Gen7 and Gen8 hardware platforms, listed in
the current HP StoreAll OS Software version.
7).
"Factory default and current HP StoreAll OS Software version information"
for the current HP StoreAll OS Software version of the HP StoreAll OS Software.
Factory default version of the HP StoreAll OS Software
installed on newly shipped models
v.6.5 or later
v6.5 or later
v6.3.1 or later
v6.3.1 or later
v6.3.1 or later
New installations are no longer available.
Table 2 (page
8), are supported with
Supported platforms
7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents