Expanding An Existing File System - HP StoreAll Series Installation Manual

4. To discover the physical volumes, run the following StoreAll command on the active Fusion
Manager, specifying only the new blades with the -h option:
ibrix_pv -a -h ib121-123,ib121-124
5. To see the LUNs associated with the physical volumes:
a. On the Navigator, click Vendor Storage, and then select the new storage expansion
module from the Vendor Storage panel.
b. In the lower Navigator, expand the Summary completely, and click LUN.

Expanding an existing file system

To add any or all of the new physical volumes to an existing file system:
1. Create a mountpoint for the file system on the new blades:
]# ibrix_mountpoint -c -h ib121-123,ib121-124 -m /ibfs1
2. Mount the file system on the blades:
# ibrix_mount -f ibfs1
3. Do one of the following to extend the file system:
Use the following StoreAll command:
~]# ibrix_fs -e -f FSNAME -p PVLIST [-t TIERNAME]
The following command extends file system ibfs1 with physical volumes d39–d68 and
assigns them to data tier SAS:
~]# ibrix_fs -e -f ibfs1 -p
d39,d40,d41,d42,d43,d44,d63,d64,d65,d66,d67,d68 -t SAS
To expand a file system from the GUI, select the file system on the Filesystems panel, and
then select Extend on the Summary panel. The Extend Filesystem screen allows you to
select the storage to be added to the file system. If data tiering is used on the file system,
you can also enter the name of the appropriate tier.
Expanding an HP StoreAll Storage 8800/9320 10 GbE cluster with an HP StoreAll 9730 module 229
h ib121-123,ib121-124 -m /ibfs1