Cabling The Hp Storeall 9730 Storage System - HP StoreAll Series Installation Manual

Cabling the HP StoreAll 9730 Storage system

This sections provides information how to cable an HP StoreAll 9730 Storage system. Information
on cabling a couplet and a fully-loaded system is provided. Fully-loaded cabling follows the same
construction for systems with 2 to 8 couplet systems.
Figure 38 HP StoreAll 9730 Storage system with 1 couplet SAS cable routing (back)
1. SAS switch bay 5 (top left)-MDL SAS capacity block 1,
drawer 1, A1, port 1 (top right)
3. SAS switch bay 7 (bottom left)-MDL SAS capacity block
1, drawer 2, A2, port 1 (top left)
2. SAS Switch bay 6 (top right)-MDL SAS capacity block
1, drawer 1, B1, port 1 (bottom right)
4. SAS Switch bay 8 (bottom right)-MDL SAS capacity block
1, drawer 2, B2, port 1 (bottom left)
Cabling HP StoreAll Storage system components 47