HP StoreAll Series Installation Manual page 117

Troubleshooting steps:
If servers fail to register on the File Servers screen of the Getting Started wizard, the following error
shown in Figure 43 (page 117)
1. Click OK to close the error message screen.
Figure 43 Registration failure Error message screen
2. Record all servers that encountered a registration problem. In
encountered a registration problem.
Figure 44 Getting Started Wizard—File Servers screen
3. Determine the register failure type:
a. Open and log in to a terminal session on the server that is running the Getting Started
wizard. The server running the Getting Started wizard is indicated by the
Figure 44 (page
the wizard.
b. Enter the ibrix_server
registered.
c. If other servers are in the process of registering, wait and repeat
registration actions have cleared.
Example of output with pending registration activity:
[root@r3r10-s1 ~]# ibrix_server -l
SERVER_NAME
appears.
117), server r3r10-s1 (with IP address 10.103.10.1) is the server running
l command. This command lists all the servers that are
STATE CPU(%)
Figure 44 (page
NET_IO(MB/s) DISK_IO(MB/s)
Troubleshooting the Getting Started Wizard
117), r3r10-s6
icon. In
Step 3.b until all pending
BACKUP HA
1 17