Hp Storeall 9300 Gateway Storage System Configuration - HP StoreAll Series Installation Manual

Figure 9 MDL SAS capacity block (rear)
1. Primary I/O module (drawer 2)
2. Primary I/O module (drawer 1)
3. Secondary I/O module (drawer 2)
4. Secondary I/O module (drawer 1)
5. SAS port 1 connector
6. SAS port 2 connector

HP StoreAll 9300 Gateway Storage system configuration

The HP StoreAll 9300 Gateway Storage system supports the following configurations, and these
configurations can be connected to select SANs/arrays, including HP 3PAR StoreServ, HP EVA,
and HP XP storage systems:
1 GbE network storage gateway
10 GbE/InfiniBand (IB) network storage gateway
Table 3 (page 15)
system features.
Table 3 HP StoreAll 9300 Storage system configuration components
Item Device
1 HP StoreAll node (based on the ProLiant DL380p
server Gen7)
Figure 10 (page 16)
provides additional information about HP StoreAll 9300 Gateway Storage
and Figure 1 1 (page 16)
Device Specifications
Each server (node) includes:
1 GbE or 10 GbE/IB Gateway Storage
Four or eight 1 GbE ports or up to two 10
GbE/IB ports
One 2-, 4-, or dual-port HBA (FC or SAS) or
Network Adapter (iSCSI)
(Model AW540D only)4- or dual-port server
adapter or IB PCIe G2 or PCIe dual port
HCA
show an HP StoreAll 9300 Gateway Storage system.
Understanding platform configurations
Quantity
At least
1 pair
15