Table of Contents
Advertisement
IP Gateway
An IP gateway is a device that converts data into the IP protocol.
To set an IP gateway:
1. On the main menu, scroll to Configuration. (See Figure 22.)
2. Press Enter.
3. On the Configuration submenu, scroll to Ethernet. (See Figure 23.)
4. Press Enter.
5. On the Ethernet submenu, scroll to Set Gateway. (See Figure 24.)
6. Press Enter.
7. At each position of the gateway address, scroll to the correct number and press
Figure 27: Setting the gateway address
Note:
8. Press Enter.
9. Press Escape or Enter to return to the menu.
SNMP Server
An SNMP server monitors a network by processing reporting activity in each
network device (hub, router, bridge, and so on). The server uses this information
to define what is obtainable from each device and what can be controlled (turned
off, on, and so on).
1/16 Tape SuperLoader Reference Guide
Enter to advance your cursor.
Default Gateway:
016.117.065.001
Use the Escape key to backspace to a previous text box, if necessary.
When you have set the gateway address, the SuperLoader displays Enter to
save.
GW changed appears on the display. You do not need to reboot the
SuperLoader.
Installation and Configuration
33
Advertisement
Table of Contents
