Running A System Confidence Check; Configuring Media Servers To Use Storeonce Catalyst - HP StoreOnce 3100 System Installation And Configuration Manual

NOTE: Data at rest and Data in flight encryption are two of three security features that can be
applied using the Security license (which must be purchased and applied in the normal way).

Running a system confidence check

It is good practice to use the StoreOnce CLI command, system confidencechecker at the end of
installation to run a self-test report on the StoreOnce System. For the products described in this
guide, this will report on any problems with the File System and external network connections.
Refer to the StoreOnce System CLI Reference Guide for more information about using this
command.
system/confidencechecker# runtest all
Confidence checks running. Checks will take maximum of 60 seconds. Please wait...
###############################################################################
#
# CONFIDENCE REPORT
#
###############################################################################
Report Date:
Product ID:
Cluster S/N:
Version:
Test Type:
### FILE SYSTEM REPORT ########################################################
File System Check:
[RESULT]
PASSED
### INTERNAL NETWORK REPORT ###################################################
Internal Network Check is supported only on HP StoreOnce multinode products.
### EXTERNAL NETWORK REPORT ###################################################
External Network Check:
[RESULT]
PASSED
### SAS CONFIGURATION REPORT ##################################################
Sas Configuration Check is supported only on HP StoreOnce multinode, 5500 and 4900 backup products.
### NOTE ######################################################################
For any warning or error messages in this report, please consult the troubleshooting
section in the customer user guide and follow the steps to perform corrective action.
### END #######################################################################
Command Successful

Configuring media servers to use StoreOnce Catalyst

With HPE Data Protector the StoreOnce deduplication engine is embedded in the HPE Data
Protector Media Agent. No additional plug-ins are required.
For other backup environments HPE has developed OpenStorage (OST) Plug-ins that create
the interface between the backup application and the StoreOnce Catalyst store. For further details
go to:
http://www.hpe.com/info/ebs
This software is available free with all StoreOnce Systems that are licensed to use StoreOnce
Catalyst. The software, including release notes and documentation, can be downloaded from:
http://www.hpe.com/support/softwaredepot.
Wed Nov 18 11:55:40 UTC 2015
HPE StoreOnce 3540 System
XXXXXNNNNNNXX
3.14.0-1539.3
all
#
#
#
Running a system confidence check 51