FRONT WHEEl/SUSPENSION/STEERING
Remove the snap ring.
Pull the fork tube out until resistance from the
slider bushing is felt. Then move it in and out,
tapping the bushing lightly until the fork tube
separates from the slider. The slider bushing will
be forced out by the fork tube bushing.
Remove the oil seal, back-up ring and slider bushing
from the fork tube.
NOTE:
Do not remove the fork tube bushing unless
it is necessary to replace it with a new one.
See inspection on page
12-20.
Remove the oil lock piece, fork piston and rebound
spring.
12-18
~HONDA
~
V30 MAGNA
SNAP RING PLIERS
07914-3230001
OR EQUIVALENT IN U.S.A.
SNAP RING
BACK-UP RING
OIL SEAL
Date of Issue: JUly,
1984
©
HONDA MOTOR CO., LTD.