~HONDA.
~ V30 MAGNA
I nstall the transmission.
Move the C6, C5 and M3/4 gears to the neutral
position.
Apply liquid sealant to the mating surface of the
upper crankcase.
CAUTION
Do not apply sealant to the area near the main
bearings.
Install the dowel pin.
NOTE:
Make sure the oil control orifice is not
clogged.
Apply molybdenum disulfied grease 'to the crank-
shaft main bearings.
Apply liquid sealant to the mating surface of the
lower crankcase.
CAUTION
Do not apply sealant to the area near the main
bearings.
Date of Issue: July, 1984
©
HONDA MOTOR CO., LTD.
CRANKSHAFT/PISTON
M3/4 GEAR
10-17