Wheels; Steering Head Bearings - Honda V30 Magna VF500C Manual

~HONDA
~V30
MAGNA
WHEELS
NOTE:
Tire pressure should be checked when tires
are COLD.
Check the tires for cuts, imbedded nails, or other
damage.
RECOMMENDED TIRES AND PRESSURES:
Front Rear
Tire size 100/90·18 130/90·16
56H 67H
Up to 90 kg
200 (2.00,28) 200 (2.00, 28)
Cold tire (200 Ib) load
pressure
90 kg (200 Ib)
kPa (kg/
250 (2.50,36)
cm', psi) load to vehicle
200 (2.00,28)
capacity load
Tire
BRIDGE-
L303
G508
brand
STONE
DUNLOP
F11
K627
Check the front and rear wheels for trueness (Sec-
tion 12 and 13).
Measure the tread depth at the center for the tires.
Replace the tires if the tread depth reaches the
following limits:
Minimum tread depth:
Front: 1.5 mm (1/16 in)
Rear: 2.0 mm (3/32 in)
STEERING HEAD BEARINGS
NOTE:
Check that the control cables do not inter-
fere with handlebar rotation.
Raise the front wheel off the ground and check
that the handlebar rotates frreely.
If the handlebar moves unevenly, binds, or has
vertical movement, adjust the steering head bearing
by turning the steering head adjusting nut.
Date of Issue: July, 1984
©
HONDA MOTOR CO., LTD.
MAINTENANCE
3-21