CRAN KSHAFT /PISTON
Coat the rod's small end and piston pin hole with
molybdenum disulfide grease.
FRONT CYLINDER
Note that the front cylinder connecting rods are
marked "MJ8·F".
I nstall the pistons on the front connecting rods so
that the intake "IN" mark is facing the same direc-
tion as the oil hole in the rod.
1 0-14
~HOND.A
~V30MAGNA
'~l---SPACER
01 L
SIDE RAIL
GAP
"FRONT"
"IN" MARK
OIL HOLE
"MJ8-F" MARK
Date of Issue: July, 1984
©
HONDA MOTOR CO., LTD.