Honda V30 Magna VF500C Manual page 171

~HONDA
~V30
MAGNA
• PISTON
Clean the piston crown, removing all carbon de-
posits.
I nspect the piston for cracks or other damage and
the ring grooves for excessive wear and carbon
build-up.
Measure the piston
0.0.
NOTE:
Take measurements at 10 mm (0.4 in) from
the bottom, and 90
0
to the piston pin hole.
SERVICE LIMIT: 59.85 mm (2.356 in)
Measure each piston pin hole 1.0.
SERVICE LIMIT: 16.06 mm (0.632 in)
• PISTON PIN
Measure each piston pin
0.0.
SERVICE LIMIT: 15.98 mm (0.629 in)
Calculate the piston pin-to-piston clearance.
SERVICE LIMIT: 0.04 mm (0.002 in)
Date of Issue: July, 1984
©
HONDA MOTOR CO., LTD.
CRAN KSHAFT /PISTON
10-7