Honda V30 Magna VF500C Manual page 150

~HONDA
~V30
MAGNA
Remove the valve spring cotters, retainers, springs
and valves.
CAUTION
To prevent loss of tension, do not com-
press the valve springs more than neces-
sary to remove the cotters.
Thread the large retainer on the com-
pressor attachment, so the compressor
will
not touch the cylinder head.
NOTE:
Mark all disassembled parts to ensure correct
reassembly.
Remove the valve stem seals, and discard them.
NOTE:
Replace the stem seals with new-ones when-
ever they are removed.
Remove carbon deposits from the combustion
chamber and clean the head gasket surfaces.
NOTE:
Avoid damaging the gasket surfaces.
Gaskets will come off easier if soaked in
solvent.
INSPECTION
CD
CYLINDER HEAD
Check the spark plug hole and valve areas for cracks.
Check the cylinder head for warpage with a straight
edge and feeler gauge
SERVICE LIMIT: 0.10 mm (0.004 in)
Date of Issue: July, 1984
©
HONDA MOTOR CO., LTD.
CYLINDER HEAD/VALVE
VALVE SPRING COMPRESSOR
07757-0010000
STRAIGHT EDGE
FEELER GAUGE
9-11