JUKI DDL-5530N Handbook page 77

SPECIFICATIONS
Without an
automatic
LZ-2280N
thread trimmer
Model
name
With an
automatic
thread trimmer
Stitch system Standard zigzag
Stitch pattern
Max. sewing speed
Max. zigzag width
(mm)
Max. feeding amount
(mm)
Min. cutting allowance
of lower knife (mm)
Lower knife driving
method
Lift of the presser foot
(mm)
Hook
Thread take-up
Lubrication
Lubricating oil
Needle
(at the time of delivery)
Needle position
changing mechanism
Reverse feed stitching
mechanism
Needle throw direction
change-over mechanism
Needle throw pattern
cam
Number of pattern cams
specified
LZ-2288N: Selectable form five different cams; Standard zigzag stitching cam, 3-step zigzag stitching cam, 2-step zigzag stitching cam,
Anti-material-slip type
Without an
automatic LZ-2280NU
thread trimmer
Model
name
With an
automatic
thread trimmer
Stitch system
Max. sewing speed
LZ-2280N, 2281N, 2282N, 2282N-7, 2284N, 2284N-7, 2286N, 2288N, 2285N, 2280NU, 2284NU, 2284NU-7 (June, 2001) 2/6
LZ-2281N
Standard wider Standard zigzag
zigzag
5,500rpm
5.0 (A type)
5.0
8.0 (B type)
2.5 (A type)
2.5
5.0 (B type)
By hand: 5.5, By knee: 10.0
SCHMETZ 438 (Nm75), ORGAN DP 5 (#10)
Triangular cam
standard scalloping cam, crescent scalloping cam. Other cams are optionally available.
LZ-2284NU
LZ-2284NU-7
4,500rpm
LZ-2282N LZ-2284N
LZ-2282N-7 LZ-2284N-7
Standard/
(with a lower knife) 3-step zigzag
5,000rpm
5.0 (standard)
4.5
10.0 (3-step)
2.5 (standard)
2.5
2.0 (3-step)
3.0
AC motor
By hand: 4.0
By hand: 5.5, By knee: 10.0
By knee: 8.5
DP hook (with a titanium-treated inner hook)
Rotary type
Fully automatic
JUKI New Defrix Oil No.1 (equivalent to ISO VG7)
Provided as standard
Provided as standard
LZ-2286N LZ-2288N
With changeable
3-step zigzag
pattern cams
Refer to the
specifications
for pattern cam
8.0
10.0
(standard:6.0)
2.0 2.5
Provided as
standard
Grooved cam
11
LZ-2285N
Fagoting
4,000rpm
8.0
2.2
By hand: 5.5
By knee: 8.0
SCHMETZ
438SUK (#80)