Sewing Machine Components - JUKI DDL-5530N Handbook

OPTIONS
Model Part No.
SA84 GSA-840000A0A Dart stretcher
GSA-85000DA0B Needle gauge: 8, 10, 12mm
SA85N
GSA-85000EA0B Needle gauge: 14, 16mm
GSA-85000FA0B Needle gauge: 18, 20mm
GSA-86000DA0 Needle gauge: 8 16mm
SA86N
GSA-86000EA0 Needle gauge: 18, 20mm
SA88 GSA-880000A0
Stand for standing work
SA89 GSA-890000A0A Small-welt sewing device
Needle gauge: 8 12mm
GSA-90000GA0
Needle gauge: 14, 16mm
SA90N
GSA-90000HA0
Needle gauge: 18, 20mm
GSA-90000IA0
SA91 Suction motor (for sim type table)
GSA-910000A0
Automatic pocket bag presser
SA92
GSA-920000A0
(for sim type table)
Automatic pocket bag presser
SA101 (for standard table and vacuum type
table)
Center reference device
SA94
GSA-94000CA0
GSA-96000AA0B Needle gauge: 8 14mm
SA96N
GSA-96000BA0B Needle gauge: 16 20mm
GSA-97000GA0A Needle gauge: 8 14mm (for left)
GSA-97000HA0A Needle gauge: 16 20mm (for left)
GSA-97000IA0A Needle gauge: 8 14mm (for right)
SA97N
GSA-97000JA0A Needle gauge: 16 20mm (for right)
GSA-97000IA0A Needle gauge: 8 14mm (for double)
GSA-97000JA0A Needle gauge: 16 20mm (for double)
Single-welt and double-welt change-over
GSA-980000A0
SA98
device
SP41 Grasping stacker
SP42 Bar stacker
SP43 Roller stacker

SEWING MACHINE COMPONENTS

Needle gauge Throat plate asm.
For knife, left
Part No.
8mm (5/16") 164-01150
10mm (25/64") 164-01259
12mm (15/32") 164-01358
14mm (35/64") 164-01457
16mm (5/8") 164-01556
18mm (45/64") 164-01655
164-01754
20mm (25/32")
For APW-195N, APW-196N
Description
The dart stretcher holds the end of the material when making a welt on a
darted part of the material to make it easier to set the darted part and improve
the reliability of the welting.
Shim device
This device encloses a garment body between its upper and lower parts and
feeds it to the needle entry area. It is especially useful for difficult-to-feed
garment bodies.
Automatic interlining feeder
To improve workability, the automatic interlining feeder automatically delivers
rolled interlining cloth onto the table and cuts it.
This stand is mounted under the main body of the machine to adjust the height
of the main body to standing work.
This device is designed for the sewing of small welts as short as 35mm or less.
The smallest possible welt size is 18mm.
(Neither the center knife nor corner knife can be used for welts measuring
21mm or less.)
Suction device (for sim type table)
The device picks up the garment body by suction force to facilitate setting of
materials on the machine.
Use the device with a suction motor (SA91).
This is the blower motor for the suction device (SA90N).
The automatic pocket bag presser is used to hold pocket bags under the
garment body when welting and pocket bag sewing are performed
concurrently.
This device equipped as standard for APW-194N. (SA92 or SA101)
This optional device is useful to sew welts oriented longitudinally from the
center of maximum-sized welts. It is intended for the sewing of welts with
darts placed in the direct front-to-back center of the welting length.
The device is effective when used for sewing welts with flaps.
Single-welt and double-welt change-over device (for APW-195N, APW-196N)
The clamp foot can be moved by fingertip control. The sewing machine is well
suited for the sewing of welts on upper garments since its specification can be
easily changed over between double-welt type and single-welt type simply by
changing a binder. The machine comes in three different types: the left single-
welt type for sewing left single-welts, the right single-welt type for sewing right
ones, and the double-side welt type designed to change over the welt type
between the left and right single-welt types.
The clamp foot can be shifted by a simple one-touch operation. Changeover
between double-welt and single-welt sewing can be easily accomplished by
replacing the binder. The single-welt changeover function comes in two
different types: the right-hand single-welt type and left-hand single-welt type.
This device equipped as standard for APW-195N.
The general-purpose stacker has a wide range of applications, including men's
wear, ladies' wear, sportswear, jumpers, etc.
This stacker is suited to welting on the hip pockets of slacks, pants of working
uniforms, etc.
This is a stacker suited for small articles that cannot be feed by a bar stacker or
grasping stacker.
Needle clamp asm.
For knife, right
Part No. Part No.
164-02356 G1402-116-JA0
164-02455 G1402-116-BA0
164-02554 G1402-116-CA0
164-02653 G1402-116-DA0
164-02752 G1402-116-EA0
164-02851 G1402-116-FA0
G1402-116-GA0
164-02950
Feature
Needle thread
Knife
counter knife
Part No. Part No.
251-37100
164-09500 164-09906
164-10508
164-11100 164-11308
APW-194N, 195N, 196N (June, 2001) 3/4
13
Needle thread
clamp plate
Part No.
164-10201
164-11407