JUKI DDL-5530N Handbook page 36

2-needle, Needle-feed/Bottom-feed, Lockstitch Machine
(for foundation)
LH-3126F
Operating noise of the machine is dramatically reduced.
The improved opener reduces the impact against the bobbin.
By reducing variations of bobbin thread tension caused by the
opener, irregular stitches are eliminated.
The strokes of the right and left thread take-up are separately
adjustable.
The adjustment range of the needle thread tension is widened.
The machine is equipped with a hook that uses a non-rotational
bobbin.
Height and inclination of the feed dog can be adjusted.
Through a simple adjustment of the machine and replacement
of the gauge, the feed method can be changed over between
the needle-feed and bottom-feed types.
SPECIFICATIONS
Model name
Max. sewing speed
Max. stitch length
Thread take-up
Needle bar stroke
Lift of the presser foot
Hook (selectable)
Needle (at the time of delivery)
Feed system
Lubrication
Lubricating oil
Distance from needle to machine arm
Bed size
Weight of the machine head
WHEN YOU PLACE ORDERS
Needle gauge Code
3.2mm (1/8") B
4.8mm (3/16") D
6.4mm (1/4") F For the "Bottom-feed: B,"
only the needle gauges B,
7.1mm (9/32") G
D, and F are applicable.
7.9mm (5/16") H
LH-3126F
Attachment
Standard throat plate, standard slide plate,
standard presser foot
Throat plate for tape-attachment, slide plate for
tape-attachment, presser foot for tape-attachment
For the above category 4, select the feed category A (needle-feed).
Combination availability table
Automatic reverse
Motor
feed function
Where "0" is selected
0
(not provided)
Where "1" is selected
Where "0" is selected
B
(provided)
Where "1" is selected
Vertical-axis hook (regular fold), specific latch hook or specific hook with a non-rotational bobbin
Fully automatic lubrication system by means of a plunger pump
Feed Code Automatic reverse feed function
Needle-feed A
Bottom-feed B
Refer to the combination
availability table.
-
Code
1
For the AK89, select the motor compatibility
4
category 1 (SC-800 or EC-10B).
Clutch motor SC-800
LH-3126F
3,000rpm
4mm (normal/reverse feed)
Slide type
33.4mm
By hand: 5.5mm, By knee: 12mm
DP 5 (#10) #9 #11
Change-over between needle-feed/bottom-feed
JUKI New Defrix Oil No.1 (equivalent to ISO VG7)
245mm
517mm 178mm
43kg
Code
Not provided
Provided
-
Auto-lifter Code
Not provided Z
Pedal switch type (AK89) P
EC-10B
Hook
00 Latch hook
0B Hook with a non-rotational bobbin
Motor
Compatible with clutch motor
(without synchronizer and
resistor pack)
Compatible with SC-800 and EC-10B
(with built-in synchronizer and
resistor pack)
Refer to the combination availability table.
LH-3126F (June, 2001) 1/2
2
LH-3126F
Code
S
C
Code
0
1