JUKI DDL-5530N Handbook page 186

APPLICATIONS SIZE OF CLOTH
D A
C
B
A
A
F
C
B
A
A
D
A
E
F
E
BUTTON CARRIER
For 4-holed button
A
A
B
Distance A(mm): Distance B(mm):
Distance between Diameter of set
holes in button pin
Standard
2.6 1.0
2.0 1.0
2.2 1.0
2.4 1.0
2.4 1.2
2.6 1.2
2.8 1.2
3.0 1.2
3.0 1.5
3.1 1.0
3.1 1.2
3.1 1.4
3.2 Taper
3.6 1.2
4.0 1.2
OPTIONS
Model Part No.
G5510-164-0A0 Auxiliary feed plate
G5508-164-0A0 Clamp for light-weight materials
G5501-164-0A0 Auxiliary clamp
Auxiliary clamp for the 1st button
G5509-164-000
with shorter distance
G5514-164-0A0 Second work clamp
MC16 Cloth suction device
ACF-164-1800 (June, 2001) 2/2
Feeding intervals
Total feeding amount
Distance from the top end of the garment body to the first button
Distance from the side end of the garment body to the button
Applicable size of the garment to be sewn
Configuration of button carrier
Distance A(mm):
Distance between
Part No. Code
holes in button
165-57902 A
Optional
165-90507 Q
165-90606 R
165-88501 S
165-88600 T
165-88709 U
165-88808 V
165-88907 W
165-89806 F1
165-87206 D
165-89004 X
165-89202 Z
165-89905 G1
165-90705 H1
165-89707 E1
Description
This part feeds heavy sewing products such as finished garments with great
reliability.
This part clamps easy-to-slack materials such as light cottons and silks to ensure
reliable feeding.
The auxiliary clamp prevents long-sized sewing products from slacking in the
direction of feed.
This clamp is used when there is only a short distance between the top of the
garment body and the first button (40mm or less).
(Applicable distance: 20 to 140mm)
This part is effective when sewing slippery materials.
It clamps the stacked materials at all times.
The cloth suction device consistently feeds front facings that are not pressed, that
are not topstitched, or that have a crease.
For 2-holed button
A
B
Distance B(mm):
Diameter of set
pin
Standard (Packed together with accessories.)
3.2 1.2
2.0 1.0
2.2 1.0
2.4 1.0
2.4 1.2
2.6 1.0
2.6 1.2
2.8 1.0
2.8 1.2
3.0 1.0
3.0 1.2
3.8 1.2
2.8 1.0
For vertical 2-hole buttons
For 3-holed buttons is available by special order.
25 650mm (0.1mm steps)
Standard: 650mm
(optional size: Max. 1,200mm)
Standard: 40 140mm
(optional size: Min. 20mm)
12 25mm
Width: 220 420mm
Length: 400 880mm
Button intervals can be respectively
changed as desired
Part No. Code
165-58009 B
165-87305 E
165-87404 F
165-87503 G
165-87909 L
165-87602 H
165-88006 M
165-87701 J
165-88105 N
165-87800 K
165-88204 P
165-87107 C
182-13603 J1
Feature
Specify at the time of order where necessary.