JUKI DDL-5530N Handbook page 177

WHEN YOU PLACE ORDERS
Machine head
AMS-210DHL6300SZ
PROGRAMMING FUNCTIONS
With its large memory, the machine responds to many different sewing patterns.
Sewing settings can be established and sewing patterns programmed entirely through the
operation panel.
Ample storage capacity: maximum of 360,000 stitches on a floppy disk, or 691 patterns on
a 2DD disk or 999 ones on a 2HD disk.
A maximum of 20,000 stitches can be input per pattern.
the machine supports embroidery patterns with large numbers of stitches.
A sewing pattern can be enlarged/reduced without changing the stitch length.
Functions that are frequently used during pattern data input (regular stitching (linear,
spline), point stitching, jumping, thread trimming, etc.) are allocated to specific keys on
the operation panel. This reduces the time required for input of pattern data.
OPTIONS
Model Part No.
PGM-20
FU01L
B5019-222-0B0
PJ-0320525-03
PJ-0205000-02
B4717-223-C00
BT040-025-1EB
BT060-040-1EB
B4712-215-0A0
SK-3312500-SE 2
SS-6151812-TP
WP-0641601-SD 5
B4720-215-0B0
MU12
B2593-210-DA0
B2594-210-DA0
B2585-210-DB0
B2586-210-DB0
–– M8607-580-AA0
AMS-210DHL6300SZ (June, 2001) 2/2
Table stand
J-AM2000L
Power supply
Single-phase 200 240V
3-phase
With this large storage capacity,
Description
Programming software for computer controlled
sewing machine
Inverted clamp device for separately driven
pneumatic feeding frame
Thread tension controller No.3
Needle cooler
Milling unit
Cassette holder fixing base (asm.)
Cassette holder (asm.)
One-touch utility clamp for the monolithic
feeding frame
One-touch utility clamp for separately-driven
pneumatic feeding frame
I/O expansion unit
B
Code
Pedal switch
100 120V C 3-pedal unit
K PK-47(3-pedal unit)
220 415V R
200 240V D
220 415V L
The PGM-20 is provided with many different input functions
to permit interactive data creation, free from difficulties,
using a general-purpose personal computer or digitizer.
The pneumatically driven inverted clamp device is best
suited for the attachment of small parts of whose entire
peripheries need to be sewn such as labels and emblems.
The tension controller unit is used to partially change the
needle thread tension during the sewing of a pattern.
The milling unit can be installed on the machine to allow
the operator to easily machine a feeding frame or feed plate.
The next material to be sewn can be placed between the
top and bottom plates of the cassette holder while the
machine is still engaged in the sewing of the currently set
material.
The feeding frame and the feed plate can be quickly
changed without any tools.
The machine is provided with external input/output ports
that are very convenient when re-modeling the machine
with accessory devices attached.
Code
B
D
Control panel Code
English and pictograph
B
Feature