JUKI DDL-5530N Handbook page 107

WHEN YOU PLACE ORDERS
MH-1410
Needle gauge
2-needle 31.8mm (1-1/4")
2-needle 34.9mm (1-3/8")
2-needle 38.1mm (1-1/2")
4-needle 6.4mm 25.4mm 6.4mm
(1/4" 1" 1/4")
The needle gauge that falls within the range from
4.8mm to 50.8mm is available.
Gauges other than those shown in the above table are
available on a special order.
OPTIONS
Model Part No.
AK122 GAK-A22010B0
311-42565
311-43068
311-43167
311-41658
MAV-07236000
MAV-07237000
MAV-07240000
MH-1410 (June, 2001) 2/2
/
Code
A
B
C
D
Pneumatic auto-lifter
( JUKI: The SC-380 or a commercially available needle positioning motor is required.)
Needle cooler (pneumatic type): For MH-1410A
Needle cooler (pneumatic type): For MH-1410B, MH-1410C
Needle cooler (pneumatic type): For MH-1410D
Brakedown folder bracket (asm.)
Top roller (made of iron)
Top roller (made of urethane)
Top roller cover (for urethan roller)
/
Pneumatic auto-lifter Code
Not provided
provided AK122
Description
Cloth puller Code
Not provided
provided V072
The V072 cannot be retrofitted to
your machine after the setup.
Designate one when placing
order for the machine.