JUKI DDL-5530N Handbook page 148

OPTIONS
Model Part No.
PGM-7 Handy programming device
142-25056 Needle cooler
Heat cutter
144-47056
Thread tension controller No. 3
B5019-222-0B0
BT-0400251-EB Air tube
Solenoid valve
PV-150209000
Solenoid valve connector asm.
142-04754
Silicon oil tank
B9211-850-0A0
Setscrew
SS-7110840SP 2
144-45050 Thread clamp device
142-24760 Thread-tension-releasing device
GPK-470010AB 3-pedal unit
PK-47
M9025-580-0A0 Junction cable
144-44202
Feed plate, blank
Belt positioning guide
144-44301
SM-9040603SC 2 Setscrew
WP-0450826SC 2 Washer of setscrew for guide
144-44004 Work clamp foot (right)
144-44103 Work clamp foot (left)
B2553-210-D0B Without knurl
B2553-210-D0A With knurl
B2554-210-D0A Without knurl
B2554-210-D0B With knurl (right)
B2554-210-D0C With knurl (left)
142-24109 Without knurl
142-24000 With knurl
144-46009 Wiper
144-45902 Wiper base
A=3.0, B=4.0 *H type
144-39608
For mechanical thread trimmer
A=4.0, B=5.0 *G type
144-39707
For mechanical thread trimmer
A=3 4.4 (ellipitical), B=5.0
144-40002 *Z type (standard)
For heat cutter (for seatbelts)
A=2.0, B=3.0
144-39400
For mechanical thread trimmer
A=2.3, B=3.3
144-39509
For mechanical thread trimmer
A=3 4.4 (ellipitical), B=5.0
For mechanical thread trimmer
144-40101
(for seatbelts)
A=3.0, B=4.0
144-39806
For heat cutter
A=4.0, B=5.0
144-39905
For heat cutter
Description
Sewing patterns can be entered or modified through the handy programming
device while holding it. Dedicated keys for frequently-used functions are
provided on the handy programming device to cut down the operation time.
The needle cooler blows air to the needle, thereby preventing thread breakage
caused by hot needle.
The heat cutter cuts both needle threads and bobbin threads (#1 to #8 synthetic
thread,) under the throat plate. (For the LK-1941 model, the heat cutter is
equipped as standard.)
The tension controller unit is used to partially change the needle thread tension
during the sewing of a pattern.
This device prevents breakage of synthetic threads.
The device prevents stitch skipping and slip-off of the thread from the needle
eyelet at the beginning of sewing.
Designed with a mechanism to clamp the needle thread under the throat plate,
the thread clamp device never interferes with the presser foot or other devices
mounted on the machine.
This device requires if you want to change the sewing position without
performing thread trimming.
(Only applicable to the LK-1942HA)
This 3 pedal unit is required if you want to use a double-step feeding frame.
Work clamp, blank for seatbelts
Knurled blank, designed for seatbelts, for machining that prevents slippage of
material more effectively than the standard one. Adjustable belt positioning
guide can be used.
Monolithic feeding frame blank
Separately driven feeding frame blank
Feed plate
Reverse sweeping wiper
In some sewing processes, the wiper may interfere with the needle when it
actuates. In such a case, the wiper can be placed at the retracted position.
Needle hole guide
Feature
B A
LK-1941ZA, 1942HA, LK-1942GA (June, 2001) 3/3
8