JUKI DDL-5530N Handbook page 181

Computer-controlled Cycle Machine with an Input Function
AMS-223C
Sewing area: 200mm(L) 300mm(W)
AMS-224C
Sewing area: 250mm(L) 400mm(W)
Best-suited for sewing processes to attach small parts onto shoes or bags,
attach pockets onto garments, sew decorative stitches, etc.
There is sufficient area under the arm (sewing area + free space 290mm
(AMS-223C) or 240mm (AMS-224C)).
The feeding frame can go up as high as 30mm, which means that a heavy-
weight material can be handled with ease.
The feeding frame can also be manually lowered.
to finely adjust the position of the material to be sewn.
The machine is capable of sewing at a speed as high as 2,000rpm
(when the stitch length is set to 3mm (AMS-223C) or 2.7mm (AMS-224C)).
The machine is equipped with a large hook which reduces the frequency that
the bobbin thread needs to be replaced.
The machine ensures accurate stitching with a resolution as precise as 0.1mm.
The newly-developed XY mechanism further improves strength and rigidity of
the feed.
Thread trimming mechanism ensures highly-improved reliability.
Computer-controlled Cycle Machine with an Input Function
for Wider Area Perfect Stitching
AMS-223P
Sewing area: 200mm(L) 300mm(W)
AMS-224P
Sewing area: 250mm(L) 400mm(W)
As a result of JUKI's thorough study of sewing performance, the area in which
hitch stitches appears is reduced to one-third or less of the area produced
with conventional cycle machines.
with perfect stitches is enlarged, and the seam quality of top stitches is
further upgraded.
Since the feeding direction of the hitch stitching area is restricted to a range
of 5˚to 55˚, each of the four different feeding directions (0˚, 90˚, 180˚and
270˚) used to sew the four sides of a rectangular label can be finished with
perfect stitching.
WHEN YOU PLACE ORDERS
Feeding frame type
Standard (pneumatic monolithic feeding frame)
Pneumatic double-stepped stroke feeding frame
Pneumatic inverted clamp
(with a double-stepped stroke feeding frame)
Pneumatic separately-driven feeding frame
(with a double-stepped stroke feeding frame)
• For the machine with sewing specification G, the feeding
frame that can be used with it is limited to S, B or L.
Machine head type Code
Standard C
Wider-area perfect stitching P
For the AMS-223P and AMS-224P, only the
application S and H are applicable.
This allows the operator
Consequently, the sewing area finished
Code Option
S Not provided
B Automatic
bobbin changer
T
L
AMS-223
AMS-224 B
Application
Standard
For medium-weight materials
For heavy-weight materials with
double-capacity shuttle hook
Code Power supply
Y 100 130V
Single-phase 190 250V
B
U.S.A.,115V
190 250V
380 440V
3-phase
U.S.A.,220V
(JE)380V
• AC 2P motor is used for the
sewing application type G.
Code Feeding frame type
S Pneumatic double-stepped
stroke feeding frame
H
G
AMS-223C
Code Pedal switch
D Standard
(2-pedal unit)
E
3-pedal unit
H
(PK47)
F
G
J
K
Code Subclass Code
Standard 5000
B
Subclass 5001
AMS-223C, 224C, 223P, 224P (June, 2001) 1/4
11
Code
C
D