JUKI DDL-5530N Handbook page 17

1-needle, Differential-feed, Lockstitch Machine
DLD-5430N
DLD-5430N-7
(with an automatic thread trimmer)
With optional devices such as a partial shirring device (PF-7) and
gathering attachment mounted on the machine, beautiful gathers
can be sewn with enhanced efficiency.
machine provides not only operating comfort, but also dramatically
improved seam quality, further cost reduction, and excellent
productivity.
The thread take-up mechanism, thread path components and
differential-feed mechanism have all been improved.
improvements, partial shirring can be performed with minimum
tension applied to the material, thus leading to greater flexibility in
response to different types of material.
SPECIFICATIONS
Model name
Max. sewing speed
Max. stitch length
Max. top-feed amount
Needle bar stroke
Lift of the presser foot
Needle (at the time of delivery)
Hook
Lubrication
Lubricating oil
Automatic reverse feed function
Power requirement
Power consumption
Weight
OPTIONS
Model Part No. Description
AK85 Auto-lifter
Remaining bobbin
AE-4 GAE-040000A0
thread detector
ED-2 Material edge sensor
PF-7 Partial shirring device
Q036 Gathering attachment
112-43763 Micro-lifter (asm.)
To mount the optional devices onto the machine after the setup, the optional PWB A Part No.: M9701-461-0A0 (separately available) will be required.
Remaining bobbin thread detector (AE-4)
This new, upgraded-quality
By these
DLD-5430N
Shirring 1:1.5 (Max. 1: 3), Stretching 1: 0.5
By hand: 5.5mm, By knee: 13mm
DB 1 (#14), For JE: 134 (Nm90)
Automatic-lubricating full-rotary hook
JUKI New Defrix Oil No.1 (equivalent to ISO VG7)
Machine head: 29kg
When the amount of remaining bobbin thread reaches the setting, the buzzer will sound to warn
the operator not to press, on the front part of the foot pedal. With this function, the operator
doesn't have to look away from the sewing work to check the bobbin thread.
When the sensor detects a material edge, it immediately stops the sewing machine and actuates
the thread trimmer. This enhances productivity by allowing the operator to conduct sewing
work without running to look out for missing stitches.
The partial shirring device permits very easy shirring.
For high-quality gathering, both effectively and consistently.
This device can be installed on the back of the face plate. It is very convenient for frequent use.
Material edge sensor (ED-2)
DLD-5430N-7
4,500rpm
5mm
30.7mm
Automatic
Provided as standard
Single-phase 100 120V, 200 240V
3-phase 200 240V
Power rating 400VA
Total weight: 82kg
Feature
Gathering attachment (Q036)
DLD-5430N, 5430N-7 (June, 2001) 1/2
1
DLD-5430N-7-WB/CP-160