JUKI DDL-5530N Handbook page 173

OPTIONS
Model Part No.
PGM-20
FU01S
FU01L
B5019-222-0B0
PJ-0320525-03
PJ-0205000-02
B4717-223-C00
BT040-025-1EB
BT060-040-1EB
B4712-215-0A0
SK-3312500-SE 2
SS-6151812-TP
WP-0641601-SD 5
B2120-215-0A0
B4150-210-DA0
MU12
B2593-210-DA0
B2594-210-DA0
B2585-210-DB0
B2586-210-DB0
M8607-580-AA0
Part No.
B1601-210-D00A Intermediate presser A 2.2 3.6 6 29.5
B1601-210-D0BA Intermediate presser B 2.7 4.1 6 29.5
B1601-210-D0CA Intermediate presser C 2.7 5.5 6 29.5
B1601-210-D0E Intermediate presser E 1.6 2.6 6 29.5
B1601-210-D0FA Intermediate presser F 2.2 3.6 9 29.5
B2553-210-D0A Feeding frame blank (with knurl)
B2553-210-D0B Feeding frame blank (without knurl)
B2554-210-D0A Feeding frame blank (without knurl)
B2554-210-D0B Feeding frame blank, right (with knurl)
B2554-210-D0C Feeding frame blank, left (with knurl)
B2556-210-D0A Lower plate blank (with knurl)
B2556-210-D0B Lower plate blank (without knurl)
Description
Programming software for computer controlled
sewing machine
Inverted clamp device for the magnet-driven
feeding frame
Inverted clamp device for separately driven
pneumatic feeding frame
Thread tension controller No.3
Needle thread clamp device
Junction cord
Milling unit
Cassette holder fixing base (asm.)
Cassette holder (asm.)
One-touch utility clamp for the magnet-driven
feeding frame
One-touch utility clamp for separately-driven
pneumatic feeding frame
I/O expansion unit
Description
A
The PGM-20 is provided with many different input functions
to permit interactive data creation, free from difficulties,
using a general-purpose personal computer or digitizer.
The pneumatically driven inverted clamp device is best
suited for the attachment of small parts of whose entire
peripheries need to be sewn such as labels and emblems.
The tension controller unit is used to partially change the
needle thread tension during the sewing of a pattern.
This device prevents the thread from tangling at the start of
sewing.
The milling unit can be installed on the machine to allow
the operator to easily machine a feeding frame or feed
plate.
The next material to be sewn can be placed between the
top and bottom plates of the cassette holder while the
machine is still engaged in the sewing of the currently set
material.
The feeding frame and the feed plate can be quickly
changed without any tools.
The machine is provided with external input/output ports
that are very convenient when re-modeling the machine
with accessory devices attached.
L
A
B L
B
Feature
AMS-210D, 210D P TYPE (June, 2001) 3/3
11