JUKI DDL-5530N Handbook page 76

High-speed, 1-needle, Lockstitch, Zigzag Stitching Machine
LZ-2280N SERIES
The hook driving shaft offset mechanism assures trouble-free and
consistent zigzag stitching.
The market-proven hook and thread take-up lever enables sewing
with upgraded consistency with a lower tension applied to the thread.
Greater durability is secured by preventing the hook from heating up
when the machine is running at high speeds.
The highly reliable machine head is structured to reduce operating
noise and prevent oil leakage.
The machine ensures easy adjustment of zigzag width and feed pitch.
The adjustable range of the feed mechanisms has been widened,
thereby upgrading the machine's responsiveness to materials.
LZ-2280N
(standard zigzag)
The standard zigzag stitching machine creates softly
finished seams. The needle rocking mechanism is
provided with a triangular cam which helps produce
beautiful seams with consistency.
LZ-2282N
(standard zigzag/with a lower knife)
(standard zigzag/with a lower knife
LZ-2282N-7
and an automatic thread trimmer)
The machine incorporates a built-in lower knife that
trims only the lower material.
machine to simultaneously attach lace to the body
of the foundation and trim only the body during
processes to attach lace to the bottoms or tops of
slips or to the joint seam lines of shorts.
LZ-2286N
(3-step zigzag)
The maximum needle throw is 10mm.
The needle rocking mechanism means a higher
degree of accuracy, thereby leading to a very high
performance.
LZ-2288N
(with changeable pattern cams)
The machine is able to perform eleven different
kinds of zigzag stitching only by a quick procedure
to replace the cams.
LZ-2285N
(fagoting)
The pressure of the fagoting holder can be
separately adjusted by the left- and right-hand
sections in order to prevent an uneven material
feed.
LZ-2281N
Two kinds of gauges can be selected in accordance with the
application of the machine: an A-type gauge with a zigzag width
of 5mm, and a B-type gauge with a zigzag width of 8mm.
The needle rocking cam is provided with a triangular cam which
helps produce beautiful seams with consistency.
LZ-2284N
LZ-2284N-7
This allows the
The operator can easily switch the needle-throwing pattern between
the standard and 3-step zigzag stitching patterns using the lever
located in the free space under the arm.
(Time required: Approx. 15 sec)
When changing the sewing product or design, there's no need to
adjust the sewing machine head or machine layout.
LZ-2280NU
LZ-2284NU
LZ-2284NU-7
With its newly developed feed mechanism, the machine prevents
"uneven feed of the upper and lower cloths" when sewing girdles
and body suits made of slippery, elastic materials.
Drop-feed sewing machines have been widely said to feed in the
lower cloth more quickly than the upper cloth.
machine prevents uneven feed between the upper and lower cloths
in spite of its a drop-feed mechanism.
In appearances, the gauge parts are identical to those of a
conventional zigzag stitching machine, and operability is in no way
affected by the newly developed feed mechanism.
LZ-2280N, 2281N, 2282N, 2282N-7, 2284N, 2284N-7, 2286N, 2288N, 2285N, 2280NU, 2284NU, 2284NU-7 (June, 2001) 1/6
(standard wider zigzag)
(with a standard/3-step zigzag stitching
pattern changeover function)
(with a standard/3-step zigzag stitching pattern changeover
function and an automatic thread trimmer)
(standard zigzag/
with an anti-material-slip capability)
(with a standard/3-step zigzag stitching pattern
changeover function and an anti-material-slip capability)
(with a standard/3-step zigzag stitching pattern
changeover function, an anti-material-slip capability
and an automatic thread trimmer)
4
LZ-2284N-7-WB/CP-160B
However, this