JUKI DDL-5530N Handbook page 204

OPTIONS
The same optional parts are offered for the APW-297 and APW-298. They can be retrofitted to either machine.
Model Part No.
SA73N GSA-730000A0B Auxiliary receiving plate (right)
SA106 GSA-106000A0 Dart stretcher
SA107 GSA-107000A0 Automatic pocket bag presser
SA109 GSA-109000A0 Automatic interlining feeder
SA110 GSA-110000A0 Stand for standing work
Right single-welt and double-
SA111 GSA-111000A0
welt changeover device
SA112 GSA-112000A0 Shim device
Automatic interlining presser
SA115 GSA-115000A0
SA116 GSA-116000A0 Table for vacuum type
SA108 GSA-108000A0 Suction device
SA91 GSA-910000A0 Suction motor
SP44 Clamp bar stacker
SP45 Roller stacker
Description
This is the receiving plate for accessories for welting patches, etc.
The dart stretcher holds the end of the material when making a welt on a darted part of the
material to make it easier to set the darted part and improve the reliability of the welting.
The automatic pocket bag presser is used to hold pocket bags under the garment body when
welting and pocket bag sewing are performed concurrently.
To improve workability, the automatic interlining feeder automatically delivers rolled interlining
cloth onto the table and cuts it.
This stand is mounted under the main body of the machine to adjust the height of the main
body to standing work.
The device opens/closes the clamp foot by fingertip control. This enables easy changeover of
the sewing machine specification between double-welt and right-single-welt types simply by
changing the binder.
This device encloses a garment body between its upper and lower parts and feeds it to the
needle entry area. It is especially useful for difficult-to-feed garment bodies.
This device is used for securing interlining under garment body for sewing.
The device picks up the garment body by suction force to facilitate setting of materials on the
machine. Use the device with a suction motor (SA91).
This is the blower motor for the suction device (SA108).
Since the main body of the stacker swings around to catch a material, even smaller garment
bodies can be consistently stacked (350 mm from the pocket position at the minimum).
Stacked garment bodies are secured with the bar.
This prevents a stacked garment body from slipping down.
This is a stacker suited for small articles that cannot be feed by a bar stacker or grasping stacker.
Feature
APW-297, 298 (June, 2001) 3/3
13