JUKI DDL-5530N Handbook page 210

WHEN YOU PLACE ORDERS
Power supply
Single-/3-phase
FINISHED BELT-LOOP STITCH SIZE
The applicable loop width for the cross-cutting device is increased.
straight-cutting device can now cut loop up to 20mm width.
The machine is factory-equipped with a cross-cutting device at the time of delivery.
Cross cutting (standard)
15 19mm (19/32" 3/4")(depending on the loop width)
11mm
(7/16")
40 70mm (1-37/64" 2-3/4")
48 78mm (1-57/64" 3-5/64")
OPTIONS
Part No.
G5700-254-0A0 Belt-loop tension releasing (fullness)
Belt-loop feeding device
G5730-254-0A0
(belt-loop slackener)
G5760-254-0A0 Air gun assembly
G5770-254-0A0 Needle cooler
G5780-254-0A0 Needle thread breakage detector
MAJOR SPARE PARTS
Part No.
G5412-254-000 Upper knife (loop cut knife)
B1818-210-D0B Shuttle, H type
B1817-210-DAC Shuttle race ring complete, C type
138-82501 Needle hole guide
138-81255 Moving knife junction
138-81008 Lower plate blank
HL-0084230-00 EP-ROM for data
MOL-254 (June, 2001) 2/2
MOL-254
Code
200 240V D
220 400V L
220 400V (For CE)
M
4mm
(5/32")
9 20mm
(23/64" 25/32")
Description
Description
Option
No options
Belt-loop tension releasing device (fullness)
Belt-loop feeding device
Air gun
Needle cooler
Needle thread breakage detector
Enter codes of required options in alphabetical order.
In this model, both the cross-cutting device and the
Straight cutting
11mm
(7/16")
9 20mm
(23/64" 25/32")
The device slackens the belt-loop when attaching it on the garment body.
The cylinder type belt-loop feeding device supports the belt-loop feeding of the
main unit.
The device cools the frictional heat generated by the needle during sewing.
The device detects breakages in the needle thread by means of a thread take-up
spring. If a needle thread breakage is detected, the device halts the sewing of
the next loop.
Remarks
Exclusive to MOL-254
Also used with the AMS-210D
Also used with the AMS-210D
Also used with the MOL-154
Also used with the MOL-154
Also used with the MOL-154
Also used with the LK-1900
Code
Z
A
B
C
D
E
40 70mm (1-37/64" 2-3/4")
48 78mm (1-57/64" 3-5/64")
Feature
4mm
(5/32")