JUKI DDL-5530N Handbook page 267

FOR MS SERIES (2-NEEDLE, FEED-OFF-THE-ARM, DOUBLE-CHAINSTITCH MACHINES)
Type
Cloth puller with a large roller
FOR MH SERIES (DOUBLE-CHAINSTITCH MACHINES)
Type
Proximity type
Cloth puller with a large roller
FOR MO SERIES (OVERLOCK/SAFETY STITCH MACHINES)
Type
Cloth puller with top and
bottom rollers
WHEN YOU PLACE ORDERS
V054A
Applicable model Code
MS series (with a large roller)
Model Applicable model
MS-1190
V054A
MS-2260
Model Applicable model
MH-380 382
V055A MH-481, -5
MH-484, -5
MH-380 382
V055B MH-481, -5
MH-484, -5
Model Applicable model
V058B MO-3000 series
V055
Applicable model
A Proximity type for MH
Large roller for MH
This type of cloth puller is suited for joining the sides of skirts and
seaming sleeve and side of shirts or blouses. The device employ an
intermittent feed method, which is almost same as the continuous feed
method. This enables the cloth puller to adapt to continuous operation
of the sewing machine, thus leading to higher efficiency.
The roller is placed near the needle. It is spaced 30 to 34mm away from
the needle. V055A adapts well to sharp curve sewing and short-distance
sewing that require sharp angle handling of the material. In addition,
the puller is provided with an intermittent feed mechanism. This enables
the puller to adapt to continuous operation of the sewing machine,
thereby achieving a higher degree of efficiency.
The puller is widely applicable to various processes including yoke
attaching to dress shrits and various materials ranging from light-weight
ladies' dresses, blouses and shirts to medium-weight blouson and
pajamas.
V055B is best-suited to the sewing of medium-weight materials which
require large feed amount and accurate straight feeding ability.
V055B helps reduce the operator's fatigue and allows unskilled operators
to operate the sewing machine. The puller comes with an intermittent
feed mechanism. This allows the puller to adapt to continuous operation
of sewing machine, thereby achieving a higher of efficiency.
This type of puller securely pulls the material while placing it between the
upper and lower rollers. This means that the material will never be fed in
a wrong direction and the material slippage will not arise.
The tape puller provides a strong pulling force, which is best-suited to the
sewing of heavy materials and long materials such as mats and curtains.
V058A
Code Applicable model
A Top and bottom roller type for MO
B
Feature
Feature
Feature
Code Voltage
A 100V 240V
380V 440V
V050 SERIES (June, 2001) 3/4
Code
A
S
19