JUKI DDL-5530N Handbook page 222

2-needle, Unison-feed, Lockstitch Machine with Vertical-axis Large Hooks
LU-1560
(with an automatic lubricating mechanism)
LU-1565
(with an organized split needle bar)
LU-1560-7 (with an automatic lubricating mechanism
and an automatic thread trimmer)
The new mechanism with a rectangular feeding motion
promises consistent feed of materials of all thickness without
the risk of stitch gathering.
The reduced lift of the feed dog helps prevent the material
from flopping and reduces operating noise and vibration.
Rectangular feed LU-1560, LU-1565, LU-1560-7
Compared with the elliptical feed, the rectangular feed helps
reduce gathered stitches.
With the adoption of a new rectangular feed mechanism, an
alternating vertical movement mechanism, and a unison feed
mechanism, the machine can feed heavy-weight materials
powerfully and smoothly.
produced without pitch errors.
The machine has adopted a new mechanism that does not
change the ratio of alternate vertical movement of the walking
foot and presser foot even when the material thickness
changes.
Even when a heavy-weight material is used, the presser foot
lift does not decrease. This means that the presser foot
comes into contact with the material at exactly the same time
that it does when sewing lighter-weight sections of the
material. As a result, the walking foot retains the material
with a consistent pressure to prevent irregular stitches.
LU-1560, LU-1560-7
• Automatic lubricating mechanism improves maintainability.
The sub oil pan and double filter prevent dust from entering
the oil.
WHEN YOU PLACE ORDERS
Without an automatic thread trimmer
LU-1560 LU-1565
Needle gauge Code
4.8mm (3/16") D
6.4mm (1/4") F
7.9mm (5/16") H
9.5mm (3/8") K
12.7mm (1/2") L
The needle gauge (attached with a circle ( )) in the table below are prepared as optional parts (separately available).
Model name 3.2mm 4.8mm
(1/8") (3/16")
LU-1560
LU-1560-7
LU-1565
PSC box/control panel for SC
SC-380- -
PSC box
Single-phase 220 240V
For General
Export
3-phase 200 220V
Single-phase 110 120V
For JUS (LA)
3-phase 220 240V
For CE Single-phase 220 240V
JUS: North America and Central and South America.
Well tensed seams are consistently
Needle gauge Code
4.8mm (3/16") D
6.4mm (1/4") F
7.9mm (5/16") H
6.4mm 7.9mm 9.5mm
(1/4") (5/16") (3/8")
Code Control panel
07 Not provided
11 Control panel display language: English.
Instruction manual comes in three
37
different languages.
38
Control panel display language: English.
34
Instruction manual comes in five
different languages.
LU-1560-7
• The machine comes with JUKI's proven thread trimming
mechanism. With its robust knife and cam configuration,
the thread trimmer reliably cuts threads as thick as #5.
• The vertical strokes of presser foot and walking foot (their
alternating vertical movement) can be easily changed using a
large dial mounted on the top surface of the machine head.
• In addition the sewing speed is automatically adjusted with
the set value. With this feature, ideal sewing conditions are
maintained at all times.
LU-1565
• The organized split needle bar mechanism makes it possible
to stop or reset the left or right needle by operating a one-
touch utility lever.
• The machine produces neatly finished stitches at corner parts
of the material.
With an automatic thread trimmer
LU-1560
Needle gauge Code
4.8mm (3/16")
6.4mm (1/4")
7.9mm (5/16")
9.5mm (3/8")
12.7mm (1/2")
Needle gauge
12.7mm 15.9mm 19.1mm
(1/2") (5/8") (3/4")
Code
00000 For General
Export
E500B
For JUS (LA)
For CE
E500C
LU-1560-7-0BB/XC-E500
-7-0B
Pneumatic auto-lifter
D Knee switch type (AK119A)
F Pedal switch type (AK119B)
H Not provided
K
L
22.2mm 25.4mm 28.6mm
(7/8") (1") (1-1/8")
Motor for SC
M
Motor
Single-phase
200 240V
3-phase
Single-phase 100 120V
3-phase 200 240V
Single-phase 200 240V
LU-1560, 1565, 1560-7 (June, 2001) 1/4
14
Code
A
B
31.8mm
(1-1/4")
Code
60
61
62
63