JUKI DDL-5530N Handbook page 266

FOR 1-NEEDLE, LOCKSTITCH MACHINES
Type
Proximity type
Proximity type
(provided with an auto-lifter)
Cloth puller with a large roller
Cloth puller with a large roller
(provided with an auto-lifter)
Cloth puller with top and
bottom rollers
WHEN YOU PLACE ORDERS
V050
Applicable model
DDL , DLD models
DLN model
DDL , DLD/
provided with an auto-lifter
DLN/provided with an auto-lifter
FOR LH SERIES (2-NEEDLE, LOCKSTITCH MACHINES)
Type
Cloth puller with a large roller
Cloth puller with a large roller
(for provided with a back
tuking solenoid type)
Cloth puller with top and
bottom rollers
Cloth puller with top and
bottom rollers
(for provided with a back
tuking solenoid type)
WHEN YOU PLACE ORDERS
V053
Applicable model
LH series (with a large roller)
LH-3100 series (with top and bottom roller)
LH series (with a large roller/for solenoid shifting type)
LH-3100 series
(with top and bottom roller/for solenoid shifting type)
V050 SERIES (June, 2001) 2/4
Model Applicable model
V051A DDL , DLD
V051B DLN
V051C DDL , DLD
V051D DLN
V052A
DDL , DLD
DLN, DLU
V052B
DDL , DLD
V056A
DLN, DLU
For the machine equipped with an auto-lifter, it is necessary to install the AK device attaching plate asm.
(part No.: MAV-051900A0) and junction cable (part No.: MAV-051910A0).
Except DDL-9000
V052
Code Applicable model
A DDL , DLD models
B DDL , DLD, DLN, DLU/
provided with an auto-lifter
C
D
Except DDL-9000
Model Applicable model
V053A
V053C
LH series
V053B
V053D
For the puller provided with a back tucking solenoid a back tucking solenoid shiftingdevice asm.
(part No.: MAV-053020A0) and junction cable (part No.: MAV-053-030A0) is required.
Code
A
B
C
D
The roller is spaced only 28mm from the needle. This makes the roller
highly adaptable to the sewing of sharp curves and extermely short
lengths of material. To avoid interference with the presser foot during
processes such as reverse stitching, the roller comes with an automatic
double-stepped stroke lifter that lifts the roller to certain height for turn-
out, and then lifts it again to the highest position of its stroke.
The cloth puller can be widely used for many different types of materials,
from light-weight materials for ladies' dresses, blouses and men's shirts,
to medium-weight materials for blazers and coats.
This type of cloth puller is best-suited for sewing medium-weight
materials, a process which requires a large feeding amount and well-
controlled straight stitching capability. This puller helps reduce operator
fatigue and enables even low-skilled operators to successfully perform
sewing operation.
The puller securelly pulls the material while placing it between the top
and bottom rollers. This means not only the material can be fed in the
correct direction but also material slippage can be avoided.
With its strong pulling force, V056 helps enhance efficiency in the sewing
of large materials and long materials such as curtains and making pin
tucks. The cloth puller must be used with an exclusive table.
V056A
Code Applicable model
A DDL , DLD, DLN, DLU models
B
This type of cloth puller is best-suited for sewing medium-weight
materials, a process which requires a large feeding amount and well-
controlled straight stitching capability.
fatigue and enables even low-skilled operators to successfully perform
sewing operation.
This type of cloth puller draws the material between top and bottom
rollers, thus preventing the material from being fed in the wrong
direction and resultant irregular stitching. The cloth puller is especially
effective when sewing newly-developed materials or men's shirts with
shape-keeping treatment. In addition, the cloth puller can be widely used
for knit fabrics or top center plaits, pockets and bottoms of pajamas.
The cloth puller must be used with an exclusive table.
If the V053B or V053D complete is delivered, an exclusive table is
necessary.
Voltage Code
100V 240V A
380V 440V S
Feature
Code Voltage
A 100V 240V
380V 440V
Feature
This puller helps reduce operator
Code
A
S