JUKI DDL-5530N Handbook page 197

Automatic Serging Machine
ASN-395L
(standard air pressure type)
ASN-395T
(standard airless type)
ASN-397
(high -grade type)
The MO-3904 model newly-developed super high-speed overlock machine
head is adopted. The machine ensures consistent sewing performance
even at the max. sewing speed of 8,000rpm, thereby improving productivity
by a large margin. The machine securely clamps the material and feeds it
straight without fail, ensuring smooth and speedy sewing performance.
The machine incorporates a newly-developed material edge guide.
This means that the machine is capable of finishing light-weight materials
with neither curled nor rolled-in edges and can sew curves with consistency
while preventing stitches from slipping off the edge of the material.
Furthermore, the machine can sew with low thread tension to suit the type
of material to be sewn. Consequently, the machine achieves excellent
seam quality when sewing soft and delicate materials.
ASN-397
The sensor detects sharp in-curves or out-curves of files and seats of slacks
and automatically adjusts the sewing speed.
of manually changing the sewing speed at curves of the material is no longer
necessary. Thanks to this mechanism, the operator can operate the sewing
machine without any trouble in areas where the material edge is rolled in.
Partial shirring can be performed by setting data in the stitching program.
The sensor functions according to the specified data and instructs the
machine to perform partial shirring, thereby preventing trouble caused by
improper stretching/shirring of the material.
SPECIFICATIONS
Model name
Machine head
Max. sewing speed
Stitch length
Lift of the presser foot
Overedging width
Needle (at the time of delivery)
Chain-off thread trimmer
Sewing specifications
Class of work
Speed control function
Cloth control device
(sharp curve sewing device)
Cloth receiving board
Curve detecting function
Curl blower and table air blower
Table lifting device
Partial shirring device
Stacker
Lubrication
Lubricating oil
Power requirement
Power consumption
Compressed air and air consumption
Dimensions (mm)
Total weight
This means that the procedure
ASN-397
Cutting curve : 200R or more (40R or more when cloth control device is used)
Cloth size : Width 400mm or less
Number of cloth : Limited to 1.
Men's slacks, one-piece, skirt, pants, coat etc.
Can be set at either
"automatic" or "manual"
Provided as standard
Provided as standard
Both out-curve and
in-curve are detected
Provided as standard
Provided as standard
Built-in differential-feed
mechanism
Option
JUKI New Defrix Oil No.2 (equivalent to ISO VG32)
Single-phase 190 250V, 3-phase 220 240V, 380 440V, 220V, 380V
700W
2
0.5MPa (5kgf/cm ), 220N /min
(when the stacker is used: 250N /min)
Single stacker
200kg (when all the optional
devices are installed: 230kg)
ASN-395L
Exclusive for MO-3904
8,000rpm
0.8 4mm
Max. 7mm
4.0mm, 4.8mm, 5.6mm
DC 27 (#11) #9 #14
T038 (suction type side cutter)
Length 480mm or more (length for which stacking is possible)
Deferential-feed mechanism
(option)
Automatic (machine head)
2
0.5MPa (5kgf/cm ), 170N /min
(when the stacker is used: 220N /min)
Double stacker
1820
1200
Cloth receiving board
Auxiliary
Main body
table
270 1500 400
190kg (when all the optional
devices are installed: 220kg)
ASN-395L
ASN-395T
Manual
Option
Option
50HZ: 835W, 60H: 905W
200kg (when all the optional
devices are installed: 210kg)
ASN-395L, 395T, 397 (June, 2001) 1/2
13