JUKI DDL-5530N Handbook page 202

Lockstitch, Automatic Welting Machine
with an Automatic Welting Patch Feeder
APW-297
(for straight pocket with flap)
APW-298
(for slanted pocket with flap)
Newly developed welting patch cutting device and automatic
flap/ pocket bag feeder are now optionally available.
These components work to upgrade seam quality and further
increase productivity over all processes, including the after-
process.
The length of thread remaining after thread trimming is further
reduced and results in cutting operation of thread picking.
As many as 100 different patterns can be stored in memory and
10 different cycle sewing programs can be established.
APW-298
The function to separately drive the needle bars allows flexible
setting of the welt angle, - a key advantage in the flexible
sewing of various kinds of pocket shapes such as slant pockets
and welt pockets.
SPECIFICATIONS
Model name
Max. sewing speed
Regular stitching
Stitch
Safety stitching
Fastening
length
stitching
Back-tack stitching
Kinds of welts
Sewing length (welt length)
Number of patterns that can be
stored in memory
Number of cycles that can be
stored in memory
Needle gauge
Needle (at the time of delivery)
Needle bar stroke
Thread
Hook
Machine head
Machine head motor
Thread take-up
Lubrication
Lubricating oil
Needle-feed system
Cloth feeding system
Automatic welting patch feeder
Bobbin thread remaining amount
detecting device
Bobbin winder
Power consumption
Compressed air and air consumption
Total weight
Dimensions (excluding the stacker)
The machine also supports longer sewing length (220mm).
When the needle gauge of 14mm is used, the corresponding optional parts must be purchased.
APW-297
For straight pocket with flap
Parallel double welt, parallel single welt
(with/without flaps)
(as small as 25mm when the corner knife is used)
10 programs (1 program
ORGAN Mt 190 Standard (#16) #16 #18
SCHMETZ 190R Standard (Nm100) Nm100 Nm110
34.4mm
2-needle, needle-feed, lockstitch machine
with a center knife
Compact AC servomotor (direct-drive system)
JUKI New Defrix oil No. 2 (equivalent to ISO VG32)
330kg
980mm (W) 1,650mm (D) 1,200mm (H)
For slanted pocket with flap
3,000rpm (1,000 3,000rpm)
Standard: 2.5mm (2.0 3.4mm)
Standard: 1.0mm (0.5 1.5mm)
Standard: 2.0mm (0.5 3.4mm)
Parallel double welt, parallel single welt,
slant double welt, slant single welt,
trapezoidal stitching (with/without flaps)
18 180mm (in increments of 1mm)
100 patterns
Combination of 5 patterns at the maximum)
10mm, 12mm, 14mm (optional
ORGAN DP 17 Standard (#16) #16 #18
SCHMETZ SY3355 Standard (Nm100) Nm100 Nm110
SPUN #50
Vertical-axis 1.6 fold-capacity hook
2-needle, needle-feed, lockstitch machine
with an organized split needle bar and a center knife
Slide type
By an oiler (machine head and hook)
Stepping motor control
By a servomotor drive
Provided as standard
Provided as standard
By an external motor
550W
2
0.5MPa (5.0kgf/cm ), 40N /min
APW-298
APW-298
)
33.4mm
350kg
APW-297, 298 (June, 2001) 1/3
13