JUKI DDL-5530N Handbook page 180

OPTIONS
Model Part No.
PGM-20
FU03
B5019-222-0B0
PV-150209000
142-04754
PX-500014000
SS-6152212SP
WP-0612516SD 2
B2120-215-0A0
B4150-210-DA0
B4720-221-DB0
MU13
MU14
B2581-221-DA0
B2582-221-0A0
B2640-215-0B0
B2641-215-0A0 2
SS-6150610SP 4
M8607-580-AA0
Part No.
B1601-210-D00A Intermediate presser A 2.2 3.6 6 29.5
B1601-210-D0BA Intermediate presser B 2.7 4.1 6 29.5
B1601-210-D0CA Intermediate presser C 2.7 5.5 6 29.5
B1601-210-D0E Intermediate presser E 1.6 2.6 6 29.5
B1601-210-D0FA Intermediate presser F 2.2 3.6 9 29.5
B2587-220-000 Work clamp paper material (A)
B2588-220-000 Work clamp paper material (B)
B2595-220-00A Presser cloth sheet
B2595-220-00B Presser cloth sheet B
B2622-215-D00 Feeding frame blank, right (with knurl)
B2623-215-D00 Feeding frame blank, left (with knurl)
B2626-215-D00 Feeding frame blank (with knurl)
B2622-221-000 Feeding frame blank, right (with knurl)
B2623-221-000 Feeding frame blank, left (with knurl)
B2626-221-000 2-step feeding frame blank
B2620-215-D00 Feeding frame blank plate (with knurl)
B2620-215-D00 Feeding frame blank plate (without knurl)
B2620-221-000 Feeding frame blank plate (with knurl)
B2621-221-000 Feeding frame blank plate
B2552-215-D0A Lower plate blank (without knurl)
B2552-215-D0B Lower plate blank (with knurl)
B2552-215-D0C Lower plate blank (0.5mm)
B2552-221-D0A Lower plate blank (without knurl)
B2552-221-D0B Lower plate blank (with knurl)
B2552-221-D0C Lower plate blank (0.5mm)
Description
Programming software for computer controlled
sewing machine
Pneumatic inverted clamp device
Thread tension controller No.3
Needle thread clamp device
Junction cord
Needle cooler
Milling unit (for AMS-215D)
Milling unit (for AMS-221D)
Cassette holder fixing base (asm.)
Cassette holder (asm.)
One-touch utility clamp
I/O expansion unit
Description
A
AMS-215D
AMS-221D
AMS-215D
AMS-221D
AMS-215D
AMS-221D
The PGM-20 is provided with many different input functions
to permit interactive data creation, free from difficulties,
using a general-purpose personal computer or digitizer.
The device is designed for installation on the machine
provided with a double-stepped stroke feeding frame
(specification: L).
The tension controller unit is used to partially change the
needle thread tension during the sewing of a pattern.
This device prevents the thread from tangling at the start of
sewing.
The milling unit can be installed on the machine to allow
the operator to easily machine a feeding frame or feed
plate.
The next material to be sewn can be placed between the
top and bottom plates of the cassette holder while the
machine is still engaged in the sewing of the currently set
material.
The feeding frame and the feed plate can be quickly
changed without any tools.
The machine is provided with external input/output ports
that are very convenient when re-modeling the machine
with accessory devices attached.
L
A
B L
B
AMS-215D, 221D, 215D P TYPE, 221D P TYPE (June, 2001) 3/3
Feature
11