JUKI DDL-5530N Handbook page 150

WHEN YOU PLACE ORDERS
Machine head
LBH-1700S
Application Code
Standard S
Accessories for the work clamp and knife
Part name
Work clamp 1
Work clamp 2
Work clamp 3
Knife 9.5mm (3/8")
Knife 12.7mm (1/2")
Knife 15.9mm (5/8")
Knife 25.4mm (1")
Knife 31.8mm (1-1/4")
List of major functions of the operation panel
Item
Pattern No. Invokes patterns stored in memory.
Needle threading Moves the needle bar to the far right position of its stroke when threading the needle.
UP counter
Counter
DOWN counter
Thread tension Establishes thread tension for sewing parallel sections and bartacking sections of buttonholes.
Establishes data on detailed parts of the stitching shape such as the overedging width,
Programming of data on
parallel-section stitch pitch, lateral position correction of the bartacking groove, lateral
detailed stitching shape
position correction of the knife groove width, clearance, and material-cutting width.
Selects one of seven stitching shapes.
Selection of stitching Square*, radial and square*, half-moon (round)*, radial, half-moon and radial, radial with
shape taper bar, radial with straight bartacking(* Three of the seven stitching shapes can be
selected on the operation panel by a simple, one-touch operation.)
Selection between
Changes over between single stitching and double stitching.
single/double stitching
Performance of the cloth
Enables and disables the knife operation.
cutting knife
Work clamp selection Selects the work clamp size.
Forward/backward travel
Moves the feed forward/backward stitch by stitch.
of feed
Change of sewing speed Changes the sewing speed with the slide speed controller.
The machine is provided as standard with seven different stitching shapes.
Square Radial and square
The buttonhole shapes marked with an asterisk (*) can be selected through the operation panel.
OPTIONS
Model Part No.
Q060 MAQ-06000-0A0
Q061 MAQ-06100-0A0
B9402-771-000
B9402-771-00A
B9401-761-000
G5001-198-0A0-A
M8524-600-0A0
B3221-771-0A0
SK-3452000-SC 4
M8525-600-0B0
GPK-51001-0A0
M9013-590-0A0
LBH-1700 (June, 2001) 2/2
Work clamp lifter
Standard (2-pedal unit)
Auto-lifter (magnet-driven type)
Auto-lifter (air-driven type)
The auto-lifter cannot be retrofitted to the machine.
Size/Part No.
Knife size: 6.4 19.1mm
Knife size: 6.4 25.4mm
Knife size: 6.4 31.8mm
Part No.: B2702-047-K00
Part No.: B2702-047-L00
Part No.: B2702-047-M00
Part No.: B2702-047-Q00
Part No.: B2702-047-S00
To be used as the counter for the No. of pcs.
To be used as the bobbin thread counter.
Half-moon (round)
Description
For men's shirts
For ladies' blouses
For lateral buttonholes on the right
front of the garment bodies
For lateral buttonholes on the left
front of the garment bodies
For vertical buttonholes
Electric bobbin winder (asm.)
Power cord (asm.)
Tension controller (asm.)
Wood screws
Thread tension control knob (asm.)
2-pedal unit for standing work (asm.)
Junction cable (asm.)
Control box
Code
A
B
C
Accessory
Factory installed on machine head
Supplied as an accessory (1 pc.)
Supplied as an accessory (1 pc )
Supplied as an accessory (1 pc.)
Factory installed on machine head
Supplied as an accessory (1 pc.)
Supplied as an accessory (1 pc.)
Supplied as an accessory (1 pc.)
Function
Square and half-moon
Radial
(round)
First buttonhole spacing guide
A ruler used to place the first buttonhole at a predetermined location on a
men's shirt or ladies' blouse based on the shape of the collar.
Buttonhole interval gauge
A ruler used to place the next buttonhole at a predetermined interval relative
to the previously finished buttonhole.
Can be mounted on the table for the operator's convenience.
The thread tension control knob is used to finely adjust the designated thread tension.
Pedal unit for standing work
MC-600
Power supply
Single-phase 220 240V
220 240V
3-phase
220 415V
For CE Single-/3-phase 220V 415V
(Not provided with a power switch)
Operation panel
Radial, with straight
Radial, with taper bar
bartacking
Features
Code
K
D
L
M