JUKI DDL-5530N Handbook page 218

1-needle, Unison-feed, Lockstitch Machine with a Vertical-axis Large Hook
LU-1508
LU-1508H
(for extra heavy-weight materials)
LU-1510
(with an automatic lubricating mechanism)
(with an automatic lubricating mechanism
LU-1510-7
and an automatic thread trimmer)
The new mechanism with a rectangular feeding motion
promises consistent feed of materials of all thickness without
stitch gathering.
The lower orbit of the feed dog prevents the material from
flopping and reduces operating noise and vibration.
Rectangular feed LU-1508, LU-1510, LU-1510-7
Compared with the elliptical feed, the rectangular feed helps
reduces gathered stitches.
Complete rectangular feed LU-1508H
The locus of the "needle" and "feed" motions are nearly
rectangular. This prevents stitch gathering and provides
efficient feed on multi-layered portions of material.
With the adoption of a new rectangular feed mechanism, an
alternating vertical movement mechanism, and a unison-
feed mechanism, the machine can feed heavy-weight
materials powerfully and smoothly.
consistently produced without pitch errors.
Even when a heavy-weight material is used, the presser foot
lift does not decrease. This means that the presser foot
comes into contact with the material at exactly the same
time that it does when sewing lighter-weight sections of the
material. As a result, the walking foot retains the material
with a consistent pressure to prevent irregular stitches.
LU-1508H
• The maximum stitch length is 10mm.
rectangular feed locus enables accurate feed of extra heavy-
weight materials while preventing stitch gathering.
• With its sufficient needle bar stroke of 38mm and long 190R
needle, the machine supports the sewing of extra heavy-
weight materials.
• The machine comes with an extra large steel handwheel with
a diameter as large as 175.
WHEN YOU PLACE ORDERS
Without an automatic thread trimmer
LU-1508 LU-1510
Application Code
Standard
For extra heavy-weight
H
materials
PSC box /control panel for SC
SC-380- -
PSC box
Single-phase
For General Export
3-phase
Single-phase
For JUS (LA)
3-phase
For CE Single-phase
JUS: North America and Central and South America.
Well tensed seams are
The complete
With an automatic thread trimmer
LU-1510-7-0B
Pneumatic auto-lifter
Knee switch type (AK119A)
Pedal switch type (AK119B)
Not provided
Code
220 240V 07 Not provided
200 220V 11 Control panel display language: English.
Instruction manual comes in three different languages.
110 120V 37
Control panel display language: English.
220 240V 38
Instruction manual comes in five different languages.
220 240V 34
LU-1510, LU-1510-7
• The machine is equipped with a bottom-feed adjusting
mechanism that adjusts the amount of bottom-feed while
keeping the needle-feed fixed.
machine can prevent uneven material feed without changing
stitch pitches.
• Automatic lubricating mechanism improves maintainability.
The machine is provided with a sub oil pan and double filter
to keep dust from entering the oil.
LU-1510-7
• The machine comes with JUKI's proven thread trimming
mechanism. With its robust knife and cam configuration,
the thread trimmer reliably cuts threads as thick as #5.
• The vertical strokes of presser foot and walking foot (their
alternating vertical movement) can be easily changed using a
large dial mounted on the top surface of the machine head.
• In addition the sewing speed is automatically adjusted with
the set value. With this feature, ideal sewing conditions are
maintained at all times.
Motor for SC
Code
A For General
Export
B
For JUS (LA)
For CE
Control panel
LU-1508, 1508H, 1510, 1510-7 (June, 2001) 1/4
LU-1510-7-0BB/XC-E500
With the mechanism, the
M
Motor Code
Single-phase
200 240V 60
3-phase
Single-phase 100 120V 61
3-phase 200 240V 62
Single-phase 200 240V 63
Code
00000
E500B
E500C
14