Mitsubishi Electric FR-E520 Instruction Manual page 170

<Examples of use>
(1) Registration of parameter to user group (when registering Pr. 3 to
user group 1)
Pr. 173 reading
SET
The number of
parameters set and
registered by the
user appears.
(2) Deletion of parameter from the user group (when Pr. 5 is deleted from
user group 1)
Pr. 174 reading
SET
The number of
parameters set and
registered by the
user appears.
(3) Set the required value in Pr. 160 to make the user group or groups
valid or invalid.
Pr. 160 Setting
0
1
10
11
Note: 1. The Pr. 77, Pr. 160 and Pr. 991 values may always be read independently of
the user group setting.
2. The Pr. 173 or Pr. 174 value read indicates the number of parameters
registered to group 1, and the Pr. 175 or Pr. 176 value read indicates the
number of parameters registered to group 2.
3. If "0" is set in the second digit of two-digit Pr. 160, it is not displayed.
However, "0" is displayed when it is set in the first digit only.
4. When "9999" is set in Pr. 174 or Pr. 176, the parameters registered to the
corresponding user group are batch-deleted.
Press the
key to select the
parameter number to
be registered.
Press the
key to select the
parameter number to
be deleted.
Description
Accessible to all parameters.
Accessible to only the parameters
registered to user group 1.
Accessible to only the parameters
registered to user group 2.
Accessible to only the parameters
registered to user groups 1 and 2.
Flickering
SET
1.5s
/ Pr. 3 is registered
to user group 1.
Flickering
SET
1.5s
Pr. 5 is deleted
/
from user group 1.
160
PARAMETERS
Press the /
key to shift to the next
parameter to be
registered.
Press the key to
SET
register the parameter.
Press the /
key to shift to the next
parameter to be
deleted.
Press the key to
SET
delete the parameter.