Mitsubishi Electric FR-E520 Instruction Manual page 247

REVISIONS
Print Date *Manual Number
Nov., 1997 IB(NA)-66813-A
Jun., 1998 IB(NA)-66813-B
Jul., 1999 IB(NA)-66813-C
Nov., 2000 IB(NA)-66813-D
Jul., 2001 IB(NA)-66813-E
Jul., 2003 IB(NA)-66813-F
*The manual number is given on the bottom left of the back cover.
First edition
ddi
A tions
• Single-phase 200V power input specifications
• Response to Standard-compliant models
• FR-E520-5.5K, 7.5K
• Pr. 146 "frequency setting command selection"
• Pr. 249 "earth (ground) fault detection at start"
Modifications
• Corrections to clerical errors
• Factory setting of Pr. 79 "operation mode selection"
ddi
A tions
• Three-phase 400V power input specifications
• Single-phase 100V power input specifications
Modifications
• Control circuit terminal screw tightening torque
ddi
A tions
• Pr. 251 "output phase failure protection selection"
• Pr. 342 "E
Modifications
• Alarm indications (E. 6, E. 7)
• Instructions for compliance with U.S. and Canadian
Electrical Codes
Modifications
• Pr. 342 "E
• Alarm indications (E. 3)
ddi
A tions
• Pr. 503 "capacitor life timer"
• Pr. 504 "capacitor life alarm output set time
Modifications
• The setting range of Pr.240 "Soft-PWM setting"
• The setting range of Pr.340 "link start up mode
selection"
Revision
2
PROM write selection" (400V class only)
2
PROM write selection"