Download  Print this page

Operation; Pre-operation Checks - Mitsubishi Electric FR-E520 Instruction Manual

Transistorized inverter.
Hide thumbs

Advertisement

3.3

Operation

3.3.1

Pre-operation checks

Before starting operation, check the following:
! ! ! ! Safety
Perform test operation after making sure that safety is ensured if the machine should
become out of control.
! ! ! ! Machine
Make sure that the machine is free of damage.
! ! ! ! Parameters
Set the parameter values to match the operating machine (system) environment.
! ! ! ! Test operation
Perform test operation and make sure that the machine operates safely under light
load at a low frequency. After that, start operation.
Since the Pr. 240 "Soft-PWM setting" value is factory-set to select Soft-PWM control,
the tone is different from that in the conventional non-low acoustic noise mode, this is
not a fault.
OPERATION/CONTROL
68

Advertisement

Table of Contents

   Also See for Mitsubishi Electric FR-E520

   Related Manuals for Mitsubishi Electric FR-E520

Comments to this Manuals

Symbols: 0
Latest comments: