Tuning Group; Tun Cw Fine; Tun Mhz Sel; Tun Am Step - Yaesu FTdx5000 Series Operating Manual

SCOPE G
136 SCP 14.0 FIX
Function: Selects the scan start frequency of the FIX mode
Spectrum Scope while monitoring on the 20 m amateur
band.
Available Values: 14000kHz ~ 14349kHz (1 kHz/step)
Default Setting: 14000kHz
137 SCP 18.0 FIX
Function: Selects the scan start frequency of the FIX mode
Spectrum Scope while monitoring on the 17 m amateur
band.
Available Values: 18000kHz ~ 18199kHz (1 kHz/step)
Default Setting: 18068kHz
138 SCP 21.0 FIX
Function: Selects the scan start frequency of the FIX mode
Spectrum Scope while monitoring on the 15 m amateur
band.
Available Values: 21000kHz ~ 21449kHz (1 kHz/step)
Default Setting: 21000kHz
139 SCP 24.8 FIX
Function: Selects the scan start frequency of the FIX mode
Spectrum Scope while monitoring on the 12 m amateur
band.
Available Values: 24800kHz ~ 24989kHz (1 kHz/step)
Default Setting: 24890kHz
140 SCP 28.0 FIX
Function: Selects the scan start frequency of the FIX mode
Spectrum Scope while monitoring on the 10 m amateur
band.
Available Values: 28000kHz ~ 29699kHz (1 kHz/step)
Default Setting: 28000kHz
141 SCP 50.0 FIX
Function: Selects the scan start frequency of the FIX mode
Spectrum Scope while monitoring on the 6 m amateur band.
Available Values: 50000kHz ~ 53999kHz (1 kHz/step)
Default Setting: 50000kHz
FT 5000 O
DX
M
M
TUNING G
142 TUN DIAL STP
Function: Setting of the Tuning Dial knob's tuning speed
except the FM and FM-PKT modes.
Available Values: 1Hz / 5Hz / 10Hz
Default Setting: 10Hz

143 TUN CW FINE

Function: Enabling/disabling of the "Fine" tuning speed
in the CW, RTTY, and PKT-SSB modes.
Available Values: DISABLE / ENABLE
Default Setting: DISABLE
ENABLE: Tuning in 1 Hz steps on the CW, RTTY,
and PKT-SSB modes.
DISABLE: Tuning according to the steps determined
via menu item "142 TUN DIAL STP".

144 TUN MHz SEL

Function: Selects the tuning steps of the [ ( DOWN )] /
[ ( UP )] key.
Available Values: 1MHz / 100kHz
Default Setting: 100kHz

145 TUN AM STEP

Function: Selects the tuning steps for the microphone's
[ UP ] / [ DWN ] keys in the AM mode.
Available Values: 2.5kHz / 5kHz / 9kHz / 10kHz / 12.5 kHz
Default Setting: 5kHz

146 TUN FM STEP

Function: Selects the tuning steps for the microphone's
[ UP ] / [ DWN ] keys in the FM and FM-PKT modes.
Available Values: 5kHz / 6.25kHz / 10kHz / 12.5kHz /
20kHz / 25kHz
Default Setting: 5kHz
147 TUN AM D.LCK
Function: Select whether the Main Tuning Dial knob and
[ CLAR ( VFO-B )] knob shall be "Enabled" or "Disabled"
on the AM mode.
Available Values: DISABLE / ENABLE
Default Setting: DISABLE
148 TUN FM D.LCK
Function: Select whether the Main Tuning Dial knob and
[ CLAR ( VFO-B )] knob shall be "Enabled" or "Disabled"
on the FM mode.
Available Values: DISABLE / ENABLE
Default Setting: DISABLE

149 TUN FM DIAL

Function: Setting of the Tuning Dial knob's tuning speed
in the FM mode.
Available Values: 10Hz / 100Hz
Default Setting: 100Hz
M
Page 133