Mounting The Oil Filter; Filling Up With Engine Oil - KTM 450 XC Owner's Manual

MAINTENANCE ON CHASSIS AND ENGINE

Mounting the oil filter

x
9.91

Filling up with engine oil

9.92
Info
Too little engine oil or poor-quality engine oil results in premature wear to the engine.
–
Check parts for damage and wear. Replace damaged or worn parts.
–
Fill the oil filters
600147-10
–
Oil the O-rings of the oil filter covers and mount them with the oil filter covers. Mount
and tighten screws
Guideline
Screw, oil filter cover
–
Connect the ground cable
Guideline
Screw, starter engine
600137-10
x
and with engine oil and place in the oil filter container.
 
and .
 
M5
on the engine and tighten the screw.

M6
168
6 Nm (4.4 lbf ft)
10 Nm (7.4 lbf ft)