MAINTENANCE ON CHASSIS AND ENGINE
0 0 0
4
B
B
3
Front shock absorber - adjusting the spring preload
9.7
Danger
Danger of accidents The shock absorber is under high pressure.
–
The shock absorber is filled with highly compressed nitrogen, so never dismantle the shock absorber or carry out any mainte-
nance on it yourself.
Warning
Danger of accidents Do not make any radical changes to the adjustment of the shock absorbers.
–
Make adjustments in small steps only.
Info
Increasing the spring preload raises the center of gravity of the vehicle. This can have a large impact on vehicle handling.
–
The cross over setting
the spring retainer
Guideline
Cross over
–
Change the settings accordingly and lock the adjusting ring.
Info
The sliding bushing is made of plastic. Therefore, do not lock it too tightly to
avoid damaging the thread.
400348-11
The left and right shock absorbers should have the same settings.
–
Remove the vehicle from the work stand. (
is measured between the sliding bushing
.
14±1.5 mm (0.55±0.059 in)
p. 66)
71
and the collar of